Sensor Type Codes; Using The Sensor Type Code Table - NEC LS2400 User Manual

Window - gives options for displaying currently open windows.
!
Help - provides version information for the SEL viewer and provides
!
help topics on the EMP.

Sensor Type Codes

The Sensor Type Code Table provides information regarding:
The type of sensor generating the SEL entry
!
The name of the sensor
!
The microcontroller which initiated the SEL entry
!
The warning or error which initiated the SEL entry.
!

Using the Sensor Type Code Table

Compare the Sensor Type and Number message shown in the SEL
viewer display (above) to the Sensor Type/Number in Verbose
column in the table below. Using information in the Sensor Name
column in the table you can determine the physical component
which generated the SEL message. The Generator ID column in
the table identifies the microcontroller that reported the event to
the SEL. Detailed information regarding the event is available
from the Event Description column in the SEL Viewer.
For example, if there is a Fan #10 entry in the Sensor Type and
Number column of the SEL Viewer, by looking at the Sensor type
Codes table you can determine that the Baseboard Fan 1 caused
this entry. The entry was reported through the Baseboard
Management Controller (BMC) on the system board.
Sensor Type and Number in
Verbose
Reserved
Temperature #17
Temperature #18
Temperature #19
Temperature #1A
Voltage # 01
Voltage # 02
Voltage # 03
Voltage # 04
Voltage # 05
*Not applicable to all servers
Sensor Type Codes
Sensor Name
00h
Processor1 Temp
Processor2 Temp*
Baseboard Temp1
Baseboard Temp2
Baseboard 5V
Baseboard 3.3V
Primary Processor
Secondary Processor*
Processor 2.5V
Emergency Management Port C-15
Generator ID
BMC
BMC
BMC
BMC
BMC
BMC
BMC
BMC
BMC
BMC