Integrated Peripheral Configuration Submenu - NEC LS2400 User Manual

Integrated Peripheral Configuration Submenu

Feature Choices
COM 1: Disabled
Enabled
(Serial Port A)
Auto
OS Controlled
Base I/O Address
3F8
2F8
3E8
2E8
Interrupt IRQ 4
IRQ 3
COM 2: Disabled
Enabled
(Serial Port B)
Auto
OS Controlled
Base I/O Address 3F8
2F8
3E8
2E8
Interrupt IRQ 4
IRQ 3
Parallel Port Disabled
Enabled
Auto
OS Controlled
Mode Output only
Bi-directional
EPP
ECP
Base I/O Address 378
278
Interrupt IRQ 5
IRQ 7
DMA channel DMA 1
DMA 3
Floppy disk Disabled
controller
Enabled
Description
Auto forces BIOS to
configure the port.
OS Controlled forces OS to
configure the port. If this
COM port is used for
Console Redirection make
sure I/O and IRQ are
identical to the values in
the server Setup Menu.
Selects the base I/O
address for COM port A.
Selects the IRQ for COM
port A.
Auto forces BIOS to
configure the port.
OS Controlled forces OS to
configure the port. If this
COM port is used for Console
Redirection make sure I/O
and IRQ are identical to the
values in the server Setup
Menu.
Selects the base I/O
address for COM port B.
Selects the IRQ for COM
port B
Auto forces BIOS to
configure the port.
OS Controlled forces OS to
configure the port.
Selects parallel port mode.
Selects the base I/O
address for LPT port.
Selects the IRQ for LPT
port.
Selects the DMA for LPT
port.
Enables onboard diskette
controller.
Your Setting
Configuring Your System 3-11