System Event Log (Sel) Window - NEC LS2400 User Manual

System Event Log (SEL) Window

The SEL displays information on the events stored in the system log
area. The information stored includes the name of the event, the date
and time the event occurred and data pertinent to the event. Event data
may include POST error codes that reflect hardware errors or software
conflicts within the system.
Note: Refer to Chapter 5, "Problem Solving" for definitions
on all POST error codes
1. From the SSU Main Menu, launch the SEL by selecting the "SEL
Viewer Add-in" task under the SEL heading in the task box. Click
OK. The SEL Viewer Add-in window (Event Log) displays.
2. The following screen choices are available:
Screen Choice
File Menu
View Menu
Settings menu
B-14 System Setup Utility
Description
Loads, saves and clears the Event Log data. The
Event Log data file is saved in either text or
binary format depending on the output format
selected under the Settings menu. Selecting Exit
returns you to the SSU Main Menu.
Views all events, events by sensor type, or
events by event type. The Event Log data file is
viewed in either text or binary format depending
on the display format selected under the
Settings menu.
Events are displayed and saved either in Hex
codes (binary format) or as text. Select "Display
Hex" to view Hex or "Display Verbose" to view
text. Select "Output Binary" to save log data in
Hex or "Output Text" to save log as text. Note:
Only files saved in binary format can be viewed
using the SSU SEL utility.