DIMMs
The system board contains four DIMM sockets labeled 1 through 4.
Each socket can hold a single 72-bit DIMM module with 32MB, 64MB,
128MB, or 256MB of memory. When all four sockets are populated, the
system board supports a maximum of 1 GB of memory with 256MB
DIMMs. A DIMM will always be installed in the bottom socket. When
you install additional DIMMs, you must start with the first empty
socket above DIMMs already installed. When you remove DIMMs, you
must start with the first DIMM socket closest to the top edge of the
system board.
4-14 Upgrading Your System
4
3
2
1
DIMM Locations