Kenmore Top-Mount Refrigerator Owner's Manual page 14

AttaeB_H9 e e _eHa_
_aHe_ te a wate_ supply
Read all directions carefully before you begin.
Electrical Shock Hazard
Unplug the refrigerator before installing
ice maker.
Failure to do so can result in death or
electrical shock.
iMPORTANT:
÷ Use copper tubing only and check for leaks.
÷ Install ice maker tubing in areas where temperatures are
above freezing,
Tools required IRI:
÷ Standard screwdriver
÷ 7.A6-inch and ½-inch open-end wrenches or
two adjustable wrenches
÷ ¼-inch nut driver
÷ ¼-inch drill bit
÷ Hand drill or electric drill (properly grounded)
NOTE: Your appliance dealer has a kit available with a
¼-inch saddle-type shut-off valve, a union, and copper
tubing. Before purchasing, make sure a saddle-type valve
complies with your local plumbing codes. Do not use a
piercing-type or M6-inch saddle valve which reduces water
flow and clogs more easily.
14