Replacing The Pick Roller - Fujitsu Scan Snap S1300i Operator's Manual

Replacing the Pick Roller

Replace the pick roller in the following procedure.
1.
Unplug the cables from the ScanSnap.
2.
Remove all documents from the ADF paper chute (cover).
3.
Pull the ADF release tab to open the ADF top section.
4.
Remove the sheet guide.
Hold the squeeze clips on both ends, and lift it up and away.
Sheet guide
ADF paper chute (cover)
ADF top section
458
Replacing the Pick Roller
ADF release tab
Squeeze clip
Squeeze clip