Fujitsu Scan Snap S1300i Operator's Manual page 329

3.
Change the settings for [Scan to Print] (If you do not want to change any
settings, go to step 4.).
1. Click the [Application Settings] button.
The [Scan to Print - Options] window appears.
2. Change the settings.
For details about the [Scan to Print - Options] window, refer to the ScanSnap
Manager Help.
3. Click the [OK] button to close the [Scan to Print - Options] window.
4.
Click the [Apply] button in the ScanSnap setup window.
5.
Click the [ ] button in the upper left corner to close the ScanSnap
setup window.
6.
Load a document in the ScanSnap.
For details about how to load documents, refer to
7.
Press the [Scan] button on the ScanSnap to start a scan.
The [Print] window appears when the scanning is completed.
"How to Load Documents" (page
329
Actions (for Mac OS Users)
33).