Mac Os - Fujitsu Scan Snap S1300i Operator's Manual

■ Mac OS

Operating system (*1)
CPU
Memory
Display resolution
Hard disk space
USB port (*3)
*1 : It is recommended to apply the latest updates to the Mac OS.
*2 : When using Mac OS X v10.7, you need to update to the latest version (3.0 or later) after you
*3 : When using a USB 3.0 port, data is transferred at the same speed as USB 2.0.
ATTENTION
If the system requirements above are not satisfied, the ScanSnap may not operate.
Do not use the USB port on the keyboard or the monitor to connect the ScanSnap (it may not function
properly).
Make sure to use a powered hub equipped with an AC adapter if you are using a commercially
available USB hub.
Scanning speed will slow down in the following cases:
- The CPU or the memory does not meet the required specifications
- The version of the USB port or the USB hub is USB 1.1
A disk space approximately three times larger than the resulting scanned file size is required when
scanning documents.
Mac OS X v10.7
(Recommended: Intel
2 GB or more
Disk space required to install the software bundled with the ScanSnap is as
follows:
ScanSnap Manager: 800 MB
ABBYY FineReader for ScanSnap: 570 MB
Cardiris: 130 MB
Evernote for Mac (*2): 55 MB
installed Evernote for Mac.
Mac OS X v10.6
®
Intel Core™ Duo 1.83 GHz or higher
®
Core™2 Duo 2.4 GHz or higher)
1 GB or more
1024 × 768 pixels or higher
USB2.0 / USB1.1
27
System Requirements
Mac OS X v10.5
512 MB or more
(Recommended: 1 GB
or more)