Fujitsu Scan Snap S1300i Operator's Manual page 83

5.
Press the [Scan] button on the ScanSnap to start a scan.
HINT
The [Scan] button setting is [Duplex Scan (Double-sided)] in default. Note that you can switch the
[Scan] button setting to [Simplex Scan (Single-sided)] in ScanSnap Manager.
For more details, refer to
You can also start scanning from the Right-Click Menu.
For more details, refer to
ATTENTION
Do not connect or disconnect the ScanSnap and other USB devices during scanning.
Do not close the ADF paper chute (cover) during scanning.
Do not switch users during scanning. Doing so will cancel scanning.
The [Scan] button on the ScanSnap flashes in blue throughout the scan.
The [ScanSnap Manager - Image scanning and file saving] dialog box appears.
The application specified for the selected profile starts up.
HINT
To select an application to link with ScanSnap Manager in the Quick Menu after scanning is
completed, refer to
When the [Set the marked text as a keyword for the PDF file] or the [Convert to Searchable PDF]
check box is selected in the [File option] tab, the application starts after text recognition has been
performed on the scanned image.
A dialog box showing the text recognition progress appears.
By default, documents are scanned with the following settings: [Image quality: Normal] and [Color
mode: Auto color detection].
For details about how to change scan settings, refer to
89).
The application that starts after scanning varies depending on what is selected in the [Application]
tab in the ScanSnap setup dialog box. For details, refer to ScanSnap Manager Help.
The output image may slightly differ from the original document in size.
When ScanSnap Organizer, CardMinder or Rack2-Filer becomes active (with the application's
dialog box brought to front and selected on taskbar), performing a scan by pressing the [Scan]
button automatically starts the linkage between ScanSnap Manager and the active application.
- ScanSnap Organizer
- CardMinder (links with ScanSnap Manager only when the document is of business card size)
- Displayed when Rack2-Filer trial version (bundled with the ScanSnap) or Rack2-Filer (V5.0 or
later recommended/bundled model or sold separately) is installed.
- Scan to Mobile
For details about automatic linkage, refer to
How to Perform a Scan (for Windows Users)
"Scanning Only One Side of a Document" (page
"Right-Click Menu" (page
"Using the Quick Menu" (page
"Automatic Linkage with Applications" (page
83
240).
71).
75).
"How to Configure Scan Settings" (page
102).