Fujitsu Scan Snap S1300i Operator's Manual page 35

6.
Load the documents in the ADF paper chute (cover).
Load the documents face-down and top-first with their back facing you. Load the
documents so that they are not beyond the reference marks within the side guides.
ATTENTION
Right-click the ScanSnap Manager icon
select [Scan Button Settings].
In the ScanSnap setup dialog box that appears, click the [Detail] button,
then select the [Scanning] tab
If the [Set the document with its face up] check box is selected in the
[Scanning mode option] dialog box, load documents face-up and bottom
edge first.
7.
Adjust the side guides to the width of the documents.
Do not leave space between the side guides and the documents.
Otherwise, the documents may be fed skewed.
Paper size
or on the taskbar, and
[Option] button.
35
How to Load Documents
Side guide