Finishing Scansnap Operation - Fujitsu Scan Snap S1300i Operator's Manual

■ Finishing ScanSnap Operation

Exiting ScanSnap Manager
Select [Exit] from the Right-Click Menu.
Normally, you do not have to exit ScanSnap Manager.
HINT
You cannot use the ScanSnap after exiting ScanSnap Manager.
Select [Start] menu
ScanSnap Manager when you want to use the ScanSnap.
Disconnecting the ScanSnap
1.
Close the ADF paper chute (cover) to turn off the ScanSnap.
The ScanSnap Manager icon on the taskbar changes from
2.
Unplug the USB cable from the computer.
3.
Unplug the power cable or the USB bus power cable from the AC outlet
or the computer.
HINT
The ScanSnap does not have a power switch and is turned ON/OFF in conjunction with the
computer's power. The ScanSnap can also be automatically turned ON/OFF by opening or closing
the ADF paper chute (cover).
How to Perform a Scan (for Windows Users)
[All Programs] [ScanSnap Manager]
85
[ScanSnap Manager] to start up
to .