Scanning Color Documents In Gray Or Black & White - Fujitsu Scan Snap S1300i Operator's Manual

■ Scanning Color Documents in Gray or Black & White
When [Auto color detection] is specified for [Color mode] in the [Scanning] tab of the
ScanSnap setup dialog box, the ScanSnap automatically recognizes whether the scanned
document is color, gray or black & white, and saves documents in their respective color
modes.
If you want to scan color documents and save them in gray or black & white, change the
settings in the following procedure.
1.
Select [Scan Button Settings] from the Right-Click Menu.
For details about the Right-Click Menu, refer to
The ScanSnap setup dialog box appears.
2.
In [Color mode] drop-down list in the [Scanning] tab, select [Gray] or
[B&W].
3.
Click the [OK] button to close the ScanSnap setup dialog box.
4.
Load a document in the ScanSnap.
For details about how to load documents, refer to
5.
Press the [Scan] button on the ScanSnap to start a scan.
Scanned image is saved in gray or black & white.
Using the ScanSnap in Various Ways (for Windows Users)
242
"Right-Click Menu" (page
"How to Load Documents" (page
71).
33).