Saving To Rack2-Filer - Fujitsu Scan Snap S1300i Operator's Manual

■ Saving to Rack2-Filer

This section explains how to save the scanned image as a PDF file in Rack2-Filer trial version
(bundled with the ScanSnap) or Rack2-Filer (V5.0 or later recommended/bundled model or
sold separately).
ATTENTION
Rack2-Filer trial version (bundled with the ScanSnap) or Rack2-Filer (V5.0 or later recommended/
bundled model or sold separately) is required to use this function.
Rack2-Filer is an application that converts paper documents and electronic documents into PDF files
and manages them in a computer. You can manage the documents as if you bind them, store them on
a cabinet shelf, and browse them as if you flip through a book.
The following settings in ScanSnap Manager are disabled when the scanned image is saved to Rack2-
Filer:
- Rename file after scanning
- Color high compression
HINT
ScanSnap Folder can also be used for this operation. For details, refer to
(page 232).
For details about the procedure to scan and save the scanned image in Rack2-Filer using or
without using the Quick Menu, refer to the following:
Using the Quick Menu (
Without Using the Quick Menu (
page 170)
page 172)
169
Actions (for Windows Users)
"ScanSnap Folder Operations"