4.
Load a document in the ScanSnap.
For details about how to load documents, refer to
5.
Press the [Scan] button on the ScanSnap to start a scan.
HINT
The [Scan] button setting is [Duplex Scan (Double-sided)] in default. Note that you can switch the
[Scan] button setting to [Simplex Scan (Single-sided)] in ScanSnap Manager.
For more details, refer to
You can also start scanning from the ScanSnap Manager menu.
For more details, refer to
ATTENTION
Do not connect or disconnect the ScanSnap and other USB devices during scanning.
Do not close the ADF paper chute (cover) during scanning.
Do not switch users during scanning.
The [Scan] button on the ScanSnap flashes in blue throughout the scan.
The [ScanSnap Manager - Image scanning and file saving] window appears.
How to Perform a Scan (for Mac OS Users)
"Scanning Only One Side of a Document" (page
"ScanSnap Manager Menu" (page
283
"How to Load Documents" (page
413).
273).
33).