Mac Os Installation - Fujitsu ScanSnap S1300 Getting Started Manual

Mac OS Installation

■ Software
You can install the following software.
ScanSnap Manager (Scanner driver)
ABBYY FineReader for ScanSnap™ (OCR
application)
Cardiris for ScanSnap (Business card text-
™
recognized application)
To use Evernote for Mac, it should also be installed.
For details about each software and its installation
procedures, refer to "Installing the Software" in the
Operator's Guide.
■ System Requirements
Mac OS X v10.7
Mac OS X v10.6
Operating
Mac OS X v10.5
system (*1)
Mac OS X v10.4
®
Intel Core™ 2 Duo 2.4 GHz or higher
recommended
CPU
(Minimum: Intel
®
PowerPC
Mac OS X v10.7
2 GB or more
Mac OS X v10.6
1 GB or more
Memory
Mac OS X v10.5
Mac OS X v10.4
512 MB or more
(1 GB or more recommended)
Display
1024 × 768 pixels or higher
resolution
Hard disk
1555 MB or more of free hard disk space
space
USB port (*2) USB 2.0/USB 1.1
*1: It is recommended to apply the latest updates to Mac
OS.
*2: When using USB 3.0 port, it works as USB 2.0.
If the CPU or the memory do not meet the
required specifications, or the type of USB
port or USB hub is USB 1.1, the scanning
speed will slow down.
®
Core™ Duo 1.83 GHz,
G5 1.6 GHz)
■ Installation
1.
Turn your computer on and log on as a
user with Administrator privileges.
2.
Insert the Setup DVD-ROM into the DVD-
ROM drive.
The [ScanSnap] window appears.
3.
Double-click the [ScanSnap] icon.
Follow the instructions on the screen to continue
with the installation.
4