Mac Os Installation - Fujitsu ScanSnap S1500 Getting Started Manual

Mac OS Installation

■ Software
You can install the following software.
•
ScanSnap Manager (Scanner driver)
•
ABBYY FineReader for ScanSnap™ (OCR
application)
•
Cardiris™ for ScanSnap (Business card text-
recognized application)
To use Evernote for Mac, SugarSync Manager for Mac,
® ®
or Adobe Acrobat 9 Pro, the required software should
also be installed.
For details about each software and its installation
procedures, refer to "Installing the Software" in the
Operator's Guide.
■ System Requirements
Operating
• Mac OS X v10.7
system (*1) • Mac OS X v10.6
• Mac OS X v10.5
• Mac OS X v10.4
®
CPU Intel Core™ 2 Duo 2.4 GHz or higher
recommended
(Minimum: Intel
GHz, PowerPC
Memory Mac OS X v10.7
2 GB or more
Mac OS X v10.6
1 GB or more
Mac OS X v10.5
Mac OS X v10.4
512 MB or more
(1 GB or more recommended)
Display 1024 × 768 pixels or higher
resolution
Hard disk 3095 MB or more of free hard disk
space
space
USB port USB 2.0 / USB 1.1
(*2)
*1: It is recommended to apply the latest updates to Mac
OS.
*2: When using USB 3.0 port, it works as USB 2.0.
If the CPU or the memory do not meet the
required specifications, or the type of USB port
or USB hub is USB 1.1, the scanning speed will
slow down.
®
Core™ Duo 1.83
®
G5 1.6 GHz)
■ Installation
1.
Turn on the computer and log in as a user
with Administrator privileges.
2.
Insert the Setup DVD-ROM into the DVD-
ROM drive.
⇒
The [ScanSnap] window appears.
3.
Double-click the [ScanSnap] icon.
Follow the instructions on the screen to
continue with the installation.
5