Scanning Color Documents In Gray Or Black & White - Fujitsu SCANSNAP S1300I Operator's Manual

Creating Scanned Images Depending on Intended Use (for Windows Users)
Scanning Color Documents in Gray or Black &
White
When [Auto color detection] is specified for [Color mode] in the [Scanning] tab of the
ScanSnap setup dialog box, the ScanSnap automatically recognizes whether the scanned
document is color, gray or black & white, and saves documents in their respective color
modes.
If you want to scan color documents and save them in gray or black & white, change the
settings in the following procedure.
1.
Select [Scan Button Settings] from the Right-Click Menu.
For details about the Right-Click Menu, refer to
36).
 The ScanSnap setup dialog box appears.
2.
In [Color mode] drop-down list in the [Scanning] tab, select [Gray] or
[B&W].
3.
Click the [OK] button to close the ScanSnap setup dialog box.
"Right-Click Menu (Windows)" (page
202