Keys States And Led Behavior; Figure 8 Sca Bridging - Aastra 6737i User Manual

Figure 8 SCA Bridging

Using the example above, when a call comes into Phone 1, Phone 2 and Phone 3 can pick up the
same call by pressing the SCA line key. Phone 2 and 3 display the call they are bridging into on the
phone's LCD display. Existing SCA parties in a bridge or one-to-one call hear an audible beep
when another party has joined the call.
Your Administrator must enable/disable the beep.
If a phone is configured for SCA bridging and it attempts to join a call, but the account on the server
does not have this functionality enabled, an error message displays to the LCD on the phone.
The SCA call bridging feature is disabled by default on all phones. Your Administrator can enable/
disable this feature if required. Contact your System Administrator for more information.

Keys States and LED Behavior

6.21.1
There are two call states on the phones that support SCA bridging:
 Bridge-active - A bridged call is in progress.
 Bridge-held - The 3rd-party (i.e., non-SCA party) in the bridge is on hold.
The following tables provide the key states and LED behavior in an SCA bridge call for users
involved in an SCA call and users not involved in the SCA call.
6.21.1.1 Line Keys and Idle Screens
State
Idle
Seized
Progressing (Outgoing
Call)
Alerting (Incoming Call)
Active
Held
Hold private
Bridge-active
Bridge-held
___________________________________________________________________________________________
6737i IP PHONE USER GUIDE - CLEARSPAN
AASTRA - 2863-001
Call LED Caller ID
N/A N/A
Solid Green None
Green Called Part 7
Blinking Unselected Red NA
Solid Green Far-end
Slow Flashing Green Far-end
Slow Flashing Green Far-end
Solid Green Far-end
Slow Flashing Green Far-end
Non-Call LED Non-Call Caller ID
Off N/A
Solid Red None
Solid Red None
Solid Red Far-end
Slow Flashing Red Far-end
Solid Red Far-end
Solid Red Far-end
Solid Red Far-end
PAGE 85 OF 112