Speeddial/Conf; Shared Call Appearance Call Retrieve - Aastra 6737i User Manual

The Speeddial/Xfer key has the following capabilities:
Function
Speeddial/Xfer and Speeddial
Speeddial/Xfer and Blind Transfer
Speeddial/Xfer and Call Forward

Speeddial/Conf

6.20
The Speeddial/Conf softkey allows you to conference another party at a pre-defined number while
on an active call. The line focus changes to the dialing line. A cancel softkey displays on the
phone allowing you to abort the conference speeddial if required.
The following messages display:
Ringing... - Displays when the far end is ringing.

 Conf. Unavailable - Briefly displays when a conference is already in progress.
For example, while on a call, you can use the Speeddial/Conf softkey to dial a recording service
and have the resulting conference recorded.
If currently in a conference, the Speeddial/Conf softkey is disabled on the active call.

Shared Call Appearance Call Retrieve

6.21
Shared Call Appearance (SCA) is when incoming calls are presented to multiple phones
simultaneously. For example, it is the ability to assign the boss' extension to a button on the
secretary's phone. Calls can be transferred between two phones with the same extension button
by simply putting the call on hold at one phone and picking it up on the other. Status LEDs light up
and flash in unison, allowing all people sharing the extension to see the status at a glance.
The phones include an enhanced SCA for the servers that support call bridging and allows two or
more SCA users to be connected in a call with a third party.
The following is an example.
___________________________________________________________________________________________
6757i IP PHONE USER GUIDE - CLEARSPAN
AASTRA - 2863-001
Description
Pressing the Speeddial/Xfer key while the phone is idle
causes the phone to go off-hook and dial the
predefined extension.
When the phone is connected to a call, pressing the
Speeddial/Xfer key blind-transfers the call to the
predefined destination.
If the transfer fails, the message "Transfer Failed"
displays, and you can retry the call by pressing the line
key again.
Pressing the Speeddial/Xfer key while the phone is
ringing forwards the call to the predefined number.
PAGE 84 OF 112