Status Display; Setting The Video Configuration - Creative PC-DVD 5x Drive Dxr2 Decoder Card User Manual

Status Display

The Status Display for Video CDs
is slightly different than shown.
Setting the Video
Configuration
Information that relates to the current DVD title is given in the Status Display.
Caption language
(if enabled)
Sound track
language
Camera angle
(if available)
To set PC-DVD defaults:
1. Before setting the video configuration, pause or stop any disc that is currently playing. On the
PC-DVD Player, click the Configuration button
2. On the Configuration page, select the Video tab.
3. On the Video tab page, you can adjust:
Brightness (relative lightness/brightness): Move the
slider to the left to decrease; move the slider to the right
to increase brightness.
Contrast (difference between dark and light colors):
Move the slider to the left to decrease; move the slider
to the right to increase contrast.
Saturation (vividness of colors): Move the slider to the
left to decrease; move the slider to the right to increase
saturation.
In the Video Output box, select the Format Type "Keep Output Same as Source" if you TV
supports the output format of the DVD-Video disc. If your TV supports only PAL and the
TV video output is in a different format, select the Format Type "Forced to PAL." If your
TV supports only PAL and the TV video output is also PAL, select "Keep Output Same as
Source."
After adjusting the video, you may return to the previously saved settings by pressing Cancel.
Time elapsed
Parental control
setting
Volume level
Audio status; when muted,
Relative speed: Blank indicates
normal speed; arrow indicates
forward or reverse
is displayed
.
Using Creative PC-DVD Player 24