Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 475

dst
The settimezone(8) command sets the time zone of the XSCF.
■
EXAMPLES
EXAMPLE 1
XSCF>
Asia/Tokyo
EXAMPLE 2
XSCF>
JST-9JDT,M3.5.0,M10.5.0
EXAMPLE 3
XSCF>
JST-9JDT-10,M4.1.0/00:00:00,M9.1.0/00:00:00
EXAMPLE 4
XSCF>
From: Sun Mar
To:
EXIT STATUS The following exit values are returned:
0
>0
SEE ALSO setdate(8), settimezone(8), showdate(8)
dst name
Displays the time zone.
showtimezone -c tz
Displays the Daylight Saving Time information as follows: the abbreviation
of time zone is JST, the offset from GMT is +9, the name of Daylight Saving
Time is JDT, Daylight Saving Time is 1 hour ahead, and the time period is
from the last Sunday of March 2:00 to the last Sunday of October 2:00.
showtimezone -c dst
Displays the Daylight Saving Time information as follows: the abbreviation
of time zone is JST, the offset from GMT is +9, the name of Daylight Saving
Time is JDT, Daylight Saving Time is 1 hour ahead, and the time period is
from the first Sunday of April 0:00 to the first Sunday of September 0:00.
showtimezone -c dst
Displays the Daylight Saving Time information that has been set in the cur-
rent time zone by default.
showtimezone -c dst -m standard
9 03:00:00 2008 PDT
Sun Nov 2 01:59:59 2008 PDT
Successful completion.
An error occurred.
-m custom
showtimezone(8)
System Administration 453