Showroute - Fujitsu SPARC Enterprise M3000 Xscf Reference Manual

NAME showroute - display routing information for an XSCF network interface
SYNOPSIS showroute [-M] [-n] {-a | interface}
showroute -h
DESCRIPTION showroute(8) command displays the current routing information for an XSCF
network interface.
Routing information for the specified network interface or all the network interfaces
can be displayed. The following information is displayed:
Destination
Gateway
Netmask
Flags
Interface
You must have one of the following privileges to run this command:
Privileges
useradm, platadm, platop, auditadm, auditop, domainadm, domainmgr,
domainop, fieldeng
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
-a
Destination IP address
Gateway address
Netmask address
Flag which indicates the status of specified routing
route is up
U
target is host
H
use gateway
G
reinstate route for dynamic routing
R
cache entry
C
reject route
!
XSCF network interface name
Displays routing information that is set for all XSCF network
interfaces.

showroute(8)

System Administration 425