Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 30

addboard(8)
OPERANDS
EXTENDED
DESCRIPTION
8 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009
-d domain_id Specifies the ID of the domain in which an XSB is to be
configured or to which it is to be assigned. domain_id can be 0–23
depending on the system configuration.
Forcibly incorporates into a domain an XSB.
-f
Caution – If the -f option is used to forcibly add an XSB to a
domain, all the added hardware resources may not work
normally. For this reason, use of the -f option is not
recommended in normal operation. If the -f option must be
specified, verify the status of every added XSB and device.
Displays usage statement. When used with other options or
-h
operands, an error occurs.
Automatically answers "n" (no) to all prompts.
-n
Suppresses all messages to stdout, including prompts.
-q
Displays a detailed message. If this option is specified with the
-v
-q option, the -v option is ignored.
Automatically answers "y" (yes) to all prompts.
-y
The following operand is supported:
xsb Specifies the XSB number to be configured or assigned. Multiple
xsb operands are permitted, separated by spaces. The following
xsb form is accepted:
x–y
where:
x
y
You can execute the addboard(8) command under the environment where the
■
following services, managed by the Solaris Service Management Facility (SMF),
are in operation:
Domain SP Communication Protocol (dscp service) is working properly and
■
the network with XSCF has been established
Domain Configuration Server (dcs service) is working properly
■
Sun cryptographic key management daemon (sckmd service) is working
■
properly
An integer from 00–15.
An integer from 0–3.