Showautologout - Fujitsu SPARC Enterprise M3000 Xscf Reference Manual

NAME showautologout - display the session timeout time of the XSCF shell
SYNOPSIS

showautologout

showautologout -h
DESCRIPTION The showautologout(8) command displays the session timeout time of the XSCF
shell.
The session timeout time is displayed in units of minutes. If the session timeout
time has not been specified with the setautologout(8) command, a time of 10
minutes is set by default.
You must have one of the following privileges to run this command:
Privileges
useradm, platadm, platop, auditadm, auditop, domainadm, domainmgr,
domainop, fieldeng
Refer to setprivileges(8) for more information.
The following option is supported:
OPTIONS
-h
EXAMPLES
EXAMPLE 1
EXAMPLE 2
EXIT STATUS The following exit values are returned:
0
>0
SEE ALSO setautologout(8)
Displays usage statement.
Displays the session timeout time of the XSCF shell.
showautologout
XSCF>
30min
Displays the session timeout time of the XSCF shell (the time is default).
showautologout
XSCF>
10min
Successful completion.
An error occurred.
showautologout(8)
System Administration 297