Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 361

■
■
When the OpenBoot PROM environmental variable 'auto-boot?' has been set
■
to false, the auto boot function is disabled.
The setdomainmode(8) command sets the modes of operation specified for a
■
domain.
EXAMPLES
EXAMPLE 1
XSCF>
Host-ID
Diagnostic Level
Secure Mode
Autoboot
CPU Mode
EXAMPLE 2
XSCF>
Host-ID
Diagnostic Level
Secure Mode
Autoboot
CPU Mode
Ethernet Address
The following exit values are returned:
EXIT STATUS
0
>0
SEE ALSO setdomainmode(8)
OpenBoot PROM diagnostic level (Diagnostic Level), CPU operational
mode (CPU Mode): operates as the showdomainmode(8) command display
Host watchdog and suppress break signal reception (Secure Mode), auto
boot function (Autoboot): off
Displays the modes of operation that are set for domain ID 0.
showdomainmode -d 0
:0f010f10
:min
:on
:on
:auto
Displays the modes of operation that are set for domain ID 0 with -v option
specified.
showdomainmode -d 0 -v
:8099010c
:min
:off
:on
:auto
:00:0b:5d:e2:01:0c
Successful completion.
An error occurred.
showdomainmode(8)
System Administration 339