Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 241

XSCF>
EXAMPLE 6
XSCF>
EXAMPLE 7
XSCF>
You specified '-r' interface remove option.
So, we delete routing information that interface corresponds.
Continue? [y|n] :y
If you choose 'y'es, you must execute 'applynetwork' command for
application.
Or you choose 'y'es, but you don't want to apply, you execute 'rebootxscf'
for reboot.
EXIT STATUS The following exit values are returned:
0
>0
SEE ALSO applynetwork(8), shownetwork(8)
on XSCF unit 1.
setnetwork xscf#1-lan#0 -m 255.255.255.0 192.168.11.10
Sets the IP address 192.168.1.10 and netmask 255.255.255.0 for the takeover IP
address of XSCF-LAN#0.
setnetwork lan#0 -m 255.255.255.0 192.168.1.10
Removes the IP address and netmask that set in XSCF-LAN#0 on XSCF unit 0
setnetwork -r xscf#0-lan#0
Successful completion.
An error occurred.
setnetwork(8)
System Administration 219