Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 270

setsnmp(8)
OPERANDS
248 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009
-l system-location
-p agent-port
-s community-string
The following operands are supported:
Enables the SNMP agent to send the chosen type of trap to the
addtraphost
desired host. If no trap-port is provided, the default is 162. A
community string is mandatory.
addtraphost takes the following options and operand:
-p trap-port
-s community-string
-t type
v1 = The agent sends SNMPv1 traps
v2 = The agent sends SNMPv2 traps
inform = The agent sends inform notifications
traphost
Specifies the system location for the agent.
Specifies the listening port for the agent. The default is
161.
Acts like a password to control access to the SNMP v1 and
v2 agents. It is a clear text string which can be intercepted.
For password encryption and no visibility, use
addv3traphost instead.
ID of the trap port. Default value
is 162.
Acts like a password to control
access to the SNMP v1 and v2
agents. It is a clear text string
which can be intercepted. For
password encryption and no
visibility, use addv3traphost
instead.
Type of trap. Valid trap types are:
Host name or IP address of the
trap host.