Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 349

If the -v option is specified, the following information is added:
Cfg-policy
No-Mem
No-IO
Float
You must have one of the following privileges to run this command:
Privileges
platadm, platop, fieldeng
Can execute the command for all domains.
domainadm, domainmgr, domainop
Can execute the command only for accessible domain.
Refer to setprivileges(8) for more information.
Degradation range applicable for an error detected during an
initial diagnosis of hardware. Any of the following is displayed:
Degradation of a component (default)
FRU
Degradation of an XSB.
XSB
System Degradation of a domain
Whether to omit the use of memory on a domain. Either of the
following is displayed:
Omits the use of memory on a domain.
True
Does not omits the use of memory on a
False
domain (default).
Whether to omit the use of I/O devices on a domain. Either of
the following is displayed:
Omits the use of I/O devices on a domain.
True
Does not omit the use of I/O devices on a
False
domain (default).
Whether to set a priority for the specified LSB as a floating board,
relative to other boards. Either of the following is displayed:
Gives a higher priority to the LSB to become
True
a floating board.
Does not give a higher priority regarding
False
floating boards (default).
showdcl(8)
System Administration 327