Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 260

Xscf control package (xcp) 109x

Hide thumbs Also See for SPARC Enterprise M3000:

Table of Contents

SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2009

Specifies an IP address to which routing information is

forwarded. The specified value is a set of four integer values

delimited by the "." (period). The following address form is

xxx.xxx.xxx.xxx

If "0.0.0.0" is specified for address, the default routing information

The following operand is supported:

Specifies the network interface to be set with routing

information. One of the following values can be specified:

For XSCF unit 0:

xscf#0-lan#0

xscf#0-lan#1

For abbreviation:

For XSCF unit 0:

xscf#0-lan#0

xscf#0-lan#1

For XSCF unit 1:

xscf#1-lan#0

xscf#1-lan#1

If the specified address is the same as the DSCP address, an error occurs.

For XSCF-LAN#0 and XSCF-LAN#1, do not set the routing to the same network

or the same host.

An integer from 0–255. Zero suppression can

be used to specify the integer.

In the M3000/M4000/M5000 servers:

In the M8000/M9000 servers: