Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 109

In EXAMPLE 3, the list command is used to display the connections between
External I/O Expansion Units and downlink cards in the host. IOX@0033 (which
includes boats, uplink cards, and power supplies) is connected to the host through
two downlink cards. The Link 0 column shows which host downlink card is
attached to boat0. The Link 1 column shows which host downlink card is
attached to boat1. IOX@12B4 is connected to the host through one downlink card.
This card is connected to boat1. A "–" shows that there is no host link connection
to the box. It may have a boat and uplink card installed in the bay, or the bay could
be empty. If the boat is installed, either it is not connected to the host, or the host
downlink card slot is powered off.
Displaying a Single External I/O Expansion Unit
EXAMPLE 4
ioxadm list iox@12B4
XSCF>
IOX
IOX@12B4
Displaying a Single External I/O Expansion Unit Using Verbose Output
EXAMPLE 5
ioxadm -v list IOU#1-PCI#1
XSCF>
Location
IOX@X07A
IOX@X07A/PS0
IOX@X07A/PS1
IOX@X07A/IOB0
IOX@X07A/IOB0/LINK CU
IOU#0-PCI#3
Displaying a Downlink Card Using Hostpath in Verbose Mode With Headers
EXAMPLE 6
Suppressed
ioxadm -p -v list IOU#0-PCI#2
XSCF>
IOU#0-PCI#2 OP
Powering On the Locator LED for Power Supply 0 in External I/O Expansion
EXAMPLE 7
Unit 12B4
ioxadm locator on iox@12B4/ps0
XSCF>
Link 0 Link 1
- IOU#1-PCI#2
Type FW Ver Serial Num Part Num
IOX 2.1 XCX07A
A195 - DD0579
A195 - DD0588
PCIE - XE00E5
2.0 XF01HJ
CU 2.0 XF01AD
2.0 XF01A1
CF005016937/5016937-03 On
CF003001701/3001701-04 On
CF003001701/3001701-04 On
CF005016939/5016939-05 On
CF005017040/5017040-04 On
CF005017040/5017040-03 On
CF005017040/5017040-03
System Administration
ioxadm(8)
State
on
87