Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 197

(continued)
-n
-q
-y
EXTENDED
■
DESCRIPTION
■
Domain CPU
configuration
SPARC64 VII
When cpumode is specified for function, one of the following can
be specified for mode:
Note – When the domain is in any status other than powered
off, it results in an error.
auto
Automatically determines the operational mode of CPU at domain
startup. Depending on the CPU configuration on the domain, any of
the following CPU operational mode is set:
Consists only of SPARC64 VII processors: SPARC64 VII
■
enhanced mode
SPARC64 VII and VI processors mixed: SPARC64 VI
■
compatible mode
Consists only of SPARC64 VI processors: SPARC64 VI
■
compatible mode
compatible
Regardless of the CPUs mounted, sets the operational mode of
CPU to the SPARC64 VI compatible mode.
Automatically answers "n" (no) to all prompts.
Suppresses all messages to stdout, including prompts.
Automatically answers "y" (yes) to all prompts.
When the command is executed, a prompt to confirm execution of the command
with the specified options is displayed. Enter "y" to execute the command or "n"
to cancel the command.
The system board (XSB) which can be added by Dynamic Reconfiguration (DR)
is decided by the CPU operational mode currently set to the domain, which is as
follows:
Value of CPU
Mode
auto
Current CPU operational mode CPU configuration of a system
SPARC64 VII enhanced
mode
setdomainmode(8)
board which can be added by
DR operation
SPARC64 VII
System Administration 175