Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 93

If neither count nor interval is specified, a single report is printed and fmstat exits.
If an interval is specified but no count is specified, fmstat prints reports every
interval seconds indefinitely until the command is interrupted by Ctrl-C.
EXAMPLES
EXAMPLE 1
XSCF>
NAME VALUE
bad_code 0
bad_fmri 0
bad_time 0
bad_vers 0
fmd.accepted 0
fmd.buflimit 10M
fmd.buftotal 0
fmd.caseclosed 0
fmd.caseopen 0
fmd.casesolved 0
fmd.ckptcnt 0
fmd.ckptrestore true
fmd.ckptsave true
fmd.ckpttime 0d
fmd.ckptzero false
fmd.debugdrop 4
fmd.dequeued 1
fmd.dispatched 1
fmd.dlastupdate 1144424838299131us hrtime of last event dequeue completion
fmd.dropped 0
fmd.dtime 0d
fmd.loadtime 1144424251692484us hrtime at which module was loaded
fmd.memlimit 10M
fmd.memtotal 97b
fmd.prdequeued 0
fmd.snaptime 1144424838299148us hrtime of last statistics snapshot
fmd.thrlimit 8
Displaying FM Statistics for the Syslog Module
fmstat -a -m syslog-msgs
DESCRIPTION
event code has no dictionary name
event fmri is missing or invalid
event time is not properly encoded
event version is missing or invalid
total events accepted by module
limit on total buffer space
total buffer space used by module
total cases closed by module
cases currently open by module
total cases solved by module
number of checkpoints taken
restore checkpoints for module
save checkpoints for module
total checkpoint time
zeroed checkpoint at startup
dropped debug messages
total events dequeued by module
total events dispatched to module
total events dropped on queue overflow
total processing time after dequeue
limit on total memory allocated
total memory allocated by module
protocol events dequeued by module
limit on number of auxiliary threads
fmstat(8)
System Administration 71