flashupdate(8)
EXTENDED
DESCRIPTION
EXAMPLES
56
SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009
Suppresses all messages to stdout, including prompts.
-q
-s version
Specifies an XCP comprehensive firmware version. For version,
specify a major version, minor version and micro version
continuously.
The XCP version number appears as xyyz by four digits, where:
x
yy
z
Automatically answers "y" (yes) to all prompts.
-y
When the command is executed, a prompt to confirm execution of the command
■
with the specified options is displayed. Enter "y" to execute the command or "n"
to cancel the command.
When the firmware is updated, the XSCF unit is reset. Therefore, LAN
■
connection to the XSCF is canceled if already established.
When there's a faulty Field Replaceable Unit (FRU), can't update the firmware.
■
Resolve the FRU fault then update.
Check whether the entire firmware can be updated to version 1082.
EXAMPLE 1
flashupdate -c check -m xcp -s 1082
XSCF>
Updates the entire firmware to version from 1080 to 1082.
EXAMPLE 2
flashupdate -c update -m xcp -s 1082
XSCF>
The XSCF will be reset. Continue? [y|n] :
XCP update is started (XCP version=1082:last version=1080)
OpenBoot PROM update is started (OpenBoot PROM version=02090000)
OpenBoot PROM update has been completed (OpenBoot PROM version=02090000)
XSCF update is started (XSCFU=0,bank=1,XCP version=1082:last version=1080)
XSCF download is started (XSCFU=0,bank=1,XCP version=1082:last
version=1080, Firmware Element ID=00:version=01080001:last
version=01080000)
XSCF download has been completed (XSCFU=0,bank=1,XCP version=1082:last
version=1080, Firmware Element ID=00:version=01080001:last
version=01080000)
:
Major firmware release number
Minor release number
Micro release number
y