Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 56

deleteboard(8)
OPTIONS
OPERANDS
34 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009
The following options are supported.
-c disconnect Detaches the XSB from the domain configuration and keeps it
assigned. If the -c option is omitted, "-c disconnect" is used.
Reserves disconnect of an XSB. If the -c option is omitted, "-c
-c reset
disconnect" is used.
Disconnects the XSB completely from the domain configuration
-c unassign
and puts it in the system board pool. If the -c option is omitted,
"-c disconnect" is used.
Forcibly detaches the specified XSB.
-f
Caution – If the -f option is used to forcibly add a system
board to a domain, all the added hardware resources may not
work normally. For this reason, use of the -f option is not
recommended in normal operation. If the -f option must be
specified, verify the status of every added system board and
device.
Displays usage statement. When used with other options or
-h
operands, an error occurs.
Automatically answers "n" (no) to all prompts.
-n
Suppresses all messages to stdout, including prompts.
-q
Displays a detailed message. If this option is specified with the
-v
-q option, the -v option is ignored.
Automatically answers "y" (yes) to all prompts.
-y
The following operand is supported:
xsb Specifies the XSB number to be disconnected. Multiple xsb
operands are permitted, separated by spaces. The following xsb
form is accepted:
x–y
where:
x
y
An integer from 00–15.
An integer from 0–3.