Clockboard - Fujitsu SPARC Enterprise M3000 Xscf Reference Manual

NAME clockboard - Set or display the clock control unit used at system startup
SYNOPSIS

clockboard

clockboard -s CLKU_B-number
clockboard -h
DESCRIPTION The clockboard(8) command specifies the clock control unit used when the
system power is turned on, or it displays the clock control unit that is currently
used and the clock control unit used at the next system startup.
The clockboard(8) command is available only for the M8000/M9000 servers.
The number 0 or 1 is used to specify or display a clock control unit. When the
clockboard(8) command is executed with no options, the clock control unit that is
currently used and the one used at the next system startup are displayed.
You must have fieldeng privilege to run this command.
Privileges
Refer to setprivileges(8) for more information.
The following options are supported:
OPTIONS
-h
-s CLKU_B-number Specifies the clock control unit to be used the next time the
EXAMPLES
EXAMPLE 1
EXAMPLE 2
EXIT STATUS The following exit values are returned:
0
>0
Displays usage statement. When used with other options or
operands, an error occurs.
system power is turned on. Either 0 or 1 can be specified for
CLKU_B-number.
Displays the clock control unit that is currently used and the one used at the
next system startup.
clockboard
XSCF>
current CLKU_B number
next CLKU_B number
Specifies the clock control unit used at the next system startup.
clockboard -s 1
XSCF>
Successful completion.
An error occurred.
:0
:1
clockboard(8)
System Administration 29