Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 498

traceroute(8)
OPERANDS
EXAMPLES
476 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009
Bypasses the routing table and directly sends the packet to the
-r
specified network host or the network device. If the desired host
or the network device is not on the same physical network, it
results in errors.
-s src_addr Specifies the source address to start tracking the route.
Displays verbose output. The size of the sending packet will be
-v
displayed.
-w wait Specifies the timeout period in units of seconds. If omitted, it is
set to 3 seconds.
The following operand is supported:
host Specifies the network host or the network device to send the
packet. Can be specified with host name or IP address. If a DSCP
address is specified, an error results.
Displays the route packets take to the host named server.example.com.
EXAMPLE 1
traceroute server.example.com
XSCF>
traceroute to server.example.com (XX.XX.XX.XX), 30 hops max, 40 byte
packets
1 XX.XX.XX.1 (XX.XX.XX.1)
2 XX.XX.XX.2 (XX.XX.XX.2)
3 XX.XX.XX.3 (XX.XX.XX.3)
4 XX.XX.XX.4 (XX.XX.XX.4)
5 XX.XX.XX.5 (XX.XX.XX.5)
6 server.example.com (XX.XX.XX.XX)
Displays the detailed route packets take to the host named server.exam-
EXAMPLE 2
ple.com. (XSCF-LAN=192.168.100.10)
traceroute -v server.example.com
XSCF>
traceroute to server.example.com (XX.XX.XX.XX), 30 hops max, 40 byte packets
1 XX.XX.XX.1 36 bytes to 192.168.100.10
2 XX.XX.XX.2 36 bytes to 192.168.100.10
3 XX.XX.XX.3 36 bytes to 192.168.100.10
1.792 ms 1.673 ms
2.235 ms 2.249 ms
2.199 ms 2.228 ms
2.516 ms 2.229 ms
2.546 ms 2.347 ms
2.172 ms 2.313 ms
1.792 ms
2.235 ms
2.199 ms
1.549 ms
2.367 ms
2.361 ms
2.357 ms
2.272 ms
2.36 ms
1.673 ms 1.549 ms
2.249 ms 2.367 ms
2.228 ms 2.361 ms