Showpowerupdelay - Fujitsu SPARC Enterprise M3000 Xscf Reference Manual

NAME showpowerupdelay - display the current settings for the warm-up time of the
system and wait time before system startup
SYNOPSIS

showpowerupdelay

showpowerupdelay -h
DESCRIPTION The showpowerupdelay(8) command displays the current settings for the warm-
up time of the system and wait time before system startup.
The following settings are displayed:
warmup time
wait time
You must have one of the following privileges to run this command:
Privileges
platadm, platop, domainadm, domainmgr, domainop, fieldeng
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
-h
EXTENDED The setpowerupdelay(8) command sets the warm-up time of the system and a
DESCRIPTION wait time before system startup.
EXAMPLES
EXAMPLE 1
EXIT STATUS The following exit values are returned:
0
>0
SEE ALSO setpowerupdelay(8)
Warm-up time
Wait time before system startup
Displays usage statement.
Displays the warm-up time of the system and wait time before system start-
up.
showpowerupdelay
XSCF>
warmup time : 10 minute(s)
wait time : 20 minute(s)
Successful completion.
An error occurred.
showpowerupdelay(8)
System Administration 421