Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 43

Continue? [y|n] :
Please reset the XSCF by rebootxscf to apply the network settings.
Please confirm that the settings have been applied by executing
showhostname, shownetwork, showroute and shownameserver after rebooting
the XSCF.
EXAMPLE 3
XSCF>
EXIT STATUS The following exit values are returned:
0
>0
SEE ALSO rebootxscf(8), sethostname(8), setnameserver(8), setnetwork(8), setroute(8)
interface :xscf#0-lan#0
status :up
IP address :10.24.144.214
netmask :255.255.255.0
route :-n 0.0.0.0 -m 0.0.0.0 -g 10.24.144.1
interface :xscf#0-lan#1
status :down
IP address :
netmask :
route :
y
Reflects the information that has been set for the XSCF network. Suppresses
prompts, and automatically answers "y" to all prompts.
applynetwork -q -y
Successful completion.
An error occurred.
applynetwork(8)
System Administration 21