Showlocator - Fujitsu SPARC Enterprise M3000 Xscf Reference Manual

NAME showlocator - display the state of the CHECK LED on the operator panel
SYNOPSIS

showlocator

showlocator -h
DESCRIPTION showlocator(8) command displays the blink state of the CHECK LED on the
operator panel.
The one of the following state is displayed:
Off
Blinking
On
You must have one of the following privileges to run this command:
Privileges
useradm, platadm, platop, fieldeng
Refer to setprivileges(8) for more information.
OPTIONS The following option is supported:
-h
EXTENDED The setlocator(8) command can be used to specify the blink state of the CHECK
DESCRIPTION LED.
EXAMPLES
EXAMPLE 1
EXIT STATUS The following exit values are returned:
0
>0
SEE ALSO setlocator(8)
Indicates normal operation, which means either the circuit
breaker is off or power is not being supplied.
Indicates that the unit is a maintenance target.
Indicates that an error was detected in the main unit.
Displays usage statement.
Displays the CHECK LED state.
showlocator
XSCF>
Locator LED status:Blinking
Successful completion.
An error occurred.
showlocator(8)
System Administration 381