Showcodusage - Fujitsu SPARC Enterprise M3000 Xscf Reference Manual

NAME showcodusage - display the current usage statistics for Capacity on Demand (COD)
resources
SYNOPSIS showcodusage [-v] [-M] [-p resource|domain|all ]
showcodusage -h
DESCRIPTION showcodusage(8) shows current information about COD right-to-use (RTU)
licenses in use.
The showcodusage(8) command is not available on the M3000 server.
By default, this command displays a summary of COD RTU licenses used and
installed, along with the current state of each resource. When used without options,
it displays the current usage.
You must have one of the following privileges to run this command:
Privileges
platadm, platop, fieldeng:
Can run this command for all resources and domains.
domainadm, domainmgr, domainop:
Can run this command for available resources only for those domains that you can
access.
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
-h
-M
-p domain
-p resource Displays license usage by resource type.
-p all
-v
Displays usage statement.
When used with other options or operands, an error occurs.
Displays text by page. This option provides a function that is the
same as that of the more command.
Displays the license usage for each domain. The statistics reported
include the number of COD RTU licenses used by the domain,
resources assigned to the domain, and COD RTU licenses reserved
for the domain.
Displays all COD usage information.
Specifies verbose output. Displays all available COD usage
information, including COD RTU license use for both the system
and its domains.

showcodusage(8)

System Administration 311