Intro - Fujitsu SPARC Enterprise M3000 Xscf Reference Manual

NAME Intro - list the commands provided by the XSCF firmware
DESCRIPTION Intro(8) command lists the commands provided by the XSCF firmware of the
SPARC Enterprise™ M3000/M4000/M5000/M8000/M9000 servers.
Some commands are used in a different way or not supported on your server. For
details, refer to the pages of each command.
LIST OF In XSCF, the following commands are provided:
COMMANDS
Intro, intro
addboard
addcodlicense
addfru
adduser
applynetwork
cfgdevice
clockboard
console
deleteboard
deletecodlicense
deletefru
deleteuser
disableuser
dumpconfig
enableuser
exit
flashupdate
fmadm
list the commands provided by the XSCF firmware
configure an eXtended System Board(XSB) into the domain
configuration or assigns it to the domain configuration
add a Capacity on Demand (COD) right-to-use (RTU)
license key to the COD license database
add a Field Replaceable Unit (FRU)
create an XSCF user account
reflect the information that has been set for the XSCF
network
connect a CD-RW/DVD-RW and TAPE drive unit to the
port, disconnect it from the port, or display the status of the
drive
set or display the clock control unit used at system startup
connect to a domain console
disconnect an eXtended System Board (XSB) from the
domain configuration
remove a Capacity on Demand (COD) right-to-use (RTU)
license key from the COD license database
delete a Field Replaceable Unit (FRU)
delete an XSCF user account
disable an XSCF user account
save system configuration information to a file
enable an XSCF user account
exit the XSCF shell
update the firmware
fault management configuration tool

Intro(8)

Intro 1