Installing/Removing The System Unit - Fujitsu PRIMERGY BX900 S1 Operating Manual

Installing the hardware
4.3.2

Installing/removing the system unit

V
CAUTION!
Because the PRIMERGY BX900 S1 system unit is large and
heavy, at least three people are needed to safely mount it in the
rack or remove it from the rack.
Please observe the safety information and notes on rack installation
in the chapter "Important notes"
Before you install the system unit in the rack, remove the
server blades, power supply units and fan units to reduce the weight
of the system unit.
Only lift or carry the system unit by the handles on the long sides.
Never lift or carry the system unit by the handles on the front or back.
I
For the japanese market:
Refer to the "Rack Mounting Guide" for more detailed explanation and for
other support systems.
Ê Make a note of the positions of the individual server blades and storage
blades, the connection blades, power supply units and fan modules in the
system unit for reinstallation.
Ê Remove the server blades, storage blades, power supply units, fan units,
connection blades and management blades from the system unit. For
assembly instructions see chapter
48
as of
"Hot-plug components" on page
Operating Manual
page 36.
83.
BX900 S1