Installing/Removing The System Unit - Fujitsu PRIMERGY BX400 S1 Operating Manual

Installing the hardware
4.4

Installing/removing the system unit

V
CAUTION!
At least two people are needed to lift the system unit. (For the Japanese
market, please refer to " 安全上のご注意 ".)
Additionally, a lifter is required in the following cases:
– The system unit weighs more than 50 kg.
– The system unit weighs more than 21 kg and is to be installed above
the height of 25 U.
When using a lifter, this install/removal procedure needs to be carried out
by maintenance personnel.
The rack may tip over if more than one unit is removed at the same time.
46
For configurations below 32 kg:
At least two people are needed to lift the system
unit.
For configurations below 55 kg:
At least three people are needed to lift the
system unit.
For configurations above 55 kg:
At least four people are needed to lift the system
unit.
Operating Manual
BX400 S1