Installation Steps, Overview - Fujitsu PRIMERGY BX900 S1 Operating Manual

2

Installation steps, overview

This chapter provides an overview of the installation steps for your BX900 S1
system unit. Links take you to sections where you can find more detailed
information about the respective steps:
Ê First read the
section "Safety
Ê Unpack the system, check the delivery for damage sustained during
transport and make sure it corresponds to the specifications in the delivery
note (see section "Unpacking the system unit" on page
Ê Install the system in the rack (see
rack" on page 41
Ê Connect the cables (see
page 51). Please also read the
connecting/disconnecting cables" on page
Ê Connect the system to the mains (see
to the mains" on page
Ê Familiarize yourself with the control and display elements on the front and
back of the system unit (see chapter
Ê Install the server blades and storage blades in the slots on the front of the
system unit (see
Ê Install the connection blades in the slots on the back of the system unit (see
section "Connection blades" on page
Ê Configure the management blades (see
management blades" on page
administration of the system unit via LAN.
Ê Install the required operating systems and applications on the server blades.
For information see the relevant operating manuals.
BX900 S1
chapter "Important notes"
instructions".
and configuration diagram on the order lists).
section "Connecting devices to the system unit" on
52).
section "Server blades and storage blades" on page
70) so that you can carry out all further
Operating Manual
from page
section "Installing the system unit in the
section "Instructions for
56.
section "Connecting the system unit
5 starting on
91).
section "Configuring
27, particularly the
40).
page 57).
83).
25