Fujitsu PRIMERGY BX900 S1 Operating Manual page 108

Hot-plug components
1 ID indicator (blue)
Lit:
2 Status indicator (green/orange)
Lit green:
Flashes orange:
Dark:
3 Status indicators for Ethernet ports (green/orange)
Dark:
Lit green:
Flashes orange:
Flashes green:
A External ports (18x)
Ports for Ethernet through SFP/SFP+ modules
108
ID LED was activated via the management blade
Power is supplied to the connection blade
Connection blade error
Power is not supplied to the connection blade
Occurs in the following cases:
– Server blade not present, powered down, or link is inactive
– Uplink port module not present
– Uplink port cable not connected
– One or both of the internal and/or external links is down
Both the internal and external links are up
Occurs in the following cases:
– Link protocol mismatch (one indicator flashes orange)
– Internal port speed configuration error (all indicators of all
ports in a port group flash together, see
page 109)
Link is up and data transfer
Operating Manual
"Port assignment" on
BX900 S1