Printing Collated Documents; Orientation; Media Type; Destination - Kyocera TASKalfa 2551ci Driver Manual

Basic

Printing Collated Documents

1
2
3
4

Orientation

Media Type

Destination

Color

5-4
If On (reverse order) is selected, the printed pages appear in reverse order
(321, 321). This option is available when Printer default is not selected under
Destination in the Basic tab.
In the Basic tab, click the Collate icons to change between on and off.
Type or select the number of complete sets of the print job in the Copies box.
The document page count must not exceed the printer tray capacity.
Click OK to return to the Print dialog box.
Click OK to start printing.
This setting specifies the paper orientation of the print job. Click the Portrait,
Landscape, Rotated portrait, or Rotated landscape icons. If a rotated option
is selected, the print job orientation is rotated 180 degrees.
Media type instructs the printer to search for the type of media that is requested
by the application or the printer driver. The choices shown may change
depending on the selection in Source. The default is Unspecified and if
selected, the driver does not switch to another source tray if the selected tray is
empty. If Auto media selection is selected, then the printer searches for
another tray or cassette using the same paper size and media type.
You can display the custom media type names from the printing system. If any
names have been changed at the printing system, the new names appear in
place of default names. To display the printing system names, use the Auto
Configure feature in Device Settings.
Some media types, such as transparencies, labels, and envelopes must be
supplied from the MP tray. Ensure that the paper is properly loaded by following
the instructions outlined in the printing system's Operation Guide.
Note: Source and Media type are separate items in the dialog box, but can
be combined using the Combine source and media type lists setting in
Device Settings > Compatibility Settings. If they are combined, Media type
is unavailable on the Basic tab, and media types can be selected in the
Source list.
This setting specifies which output tray is used for the print job output.
For color models, the following options are available:
Full color
This mode prints full four-color text and graphics.
User Guide