Collation; Printing Collated Documents; Printing In Color, Black & White And Ecoprint; Kyocera Logo - Kyocera FS-C5100DN User Manual

Basic
2

Collation

Printing Collated Documents

1
2
3
4
Printing in Color, Black & White and EcoPrint

Kyocera Logo

4-5
Select either Flip on long edge or Flip on short edge.
Collate specifies the order in which the pages of a multiple copy job are printed.
With Collate selected, the first time the print job is sent to the printing system
the data is rendered as page images in the printing system's memory. The
remaining job copies are printed from the stored data. This avoids the extra
processing involved in sending every copy from the computer to the printing
system.
With Collate selected, the driver prints the complete job set by set. With Collate
cleared, it prints each page by set. For example, with Collate selected, three
copies of a five-page document outputs as pages one through five in
succession, three times.
When printing multiple copies of a multipage document, the printer can
assemble the pages of each copy in numerical order.
In your application, open the Print dialog box and click Properties.
In the Basic tab, select the Collate check box.
Type or select the number of complete sets in the Copies box. When printing
using the collate option, specify the number of copies to print. The document
page count must not exceed the printer tray capacity.
Click OK to return to the Print dialog box, and click OK to begin printing.
The options in Color let you choose full-color printing or printing with black toner
only and EcoPrint, which makes text appear lighter. The following color modes
are available:
Color (CMYK)
This mode prints full four-color text and graphics.
Black & White
This mode prints with black toner only, constraining all color settings.
EcoPrint makes the entire image, text and graphics, appear lighter in the
printed job. EcoPrint does not increase print speed.
Color, Black & White and EcoPrint also appear in the Quick Print tab and in
the Imaging tab. Changes in Quick Print, Basic, or Imaging tabs are reflected
in the other dialog box.
Select between Color (CMYK) or Black & White for your printing job. EcoPrint
is optional.
The Kyocera logo appears at the bottom of every driver tab. Click the logo to
open the About dialog box that displays the driver version number and driver
plug-in information.
User Guide