Replacing The Roller Set - Fujitsu ScanZen EK6 Consumable Replacement And Cleaning Instructions

The roller set consists of a brake roller and a pick roller. Here's how to replace the rollers:
1. Remove all documents from the ADF paper chute (feeder).
2. Open the ADF.
3. Remove the brake roller.
a. Press the cover bushing of the brake roller to open the cover in the direction of the
arrow.
b. Pull out the left side of the brake roller shaft, and then pull out the right side of the shaft
from the hole.
4. Remove the brake roller from its shaft.
CG00002-297901
©ScanZen

Replacing the Roller Set

Brake roller shaft
CAUTION:
Be careful not to have your fingers
caught when the ADF closes.
Brake roller
Brake roller shaft
3