Front Bezel Security - HP ProDesk 600 Maintenance And Service Manual

Front bezel security

The front bezel can be locked in place by installing a security screw provided by HP. To install the
security screw:
1.
Prepare the computer for disassembly
2.
If the computer is on a stand, remove the computer from the stand.
3.
Remove the access panel
4.
Remove the front bezel
5. Remove one of the five silver 6-32 standard screws located on top of the drive cage.
88 Chapter 6 Removal and replacement procedures: Small Form Factor (SFF)
(Preparation for disassembly on page
(Access panel on page
(Front bezel on page 87).
86).
85).