Front Bezel Security - HP EliteDesk 880 G4 TWR Maintenance And Service Manual

Front bezel security

The front bezel can be secured in place by installing a screw through the front of the chassis into the front
bezel.
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the silver 6-32 security screw located on the chassis.
4. Make sure the front bezel is installed on the chassis.
5. Install the security screw through the hole in the center retainer tab on the front bezel to secure the
bezel in place.
6. Replace the computer access panel.
(Preparation for disassembly on page
(Access panel on page 19)
18)
Front bezel security 21